Dentpuller 110V Vehicle Panel Spot Puller Dent Spotter with Key

【Practical】This DENTPULLER 110V Dent Puller Machine with 3800A output current, ideal for all steel straightening and dent pulling jobs Tips: Please choose 220v and 110v machines according to the power supply conditions supported by your factory or home. Machines with different powers can only run well under the corresponding power supply conditions and are not compatible【Efficient】This Spot Puller is equipped with an automatic pulse system. The host automatically detects the power link, then generates a point in 2 seconds, solid welding and joint, smaller point, reduce the degree of carbonation, improved work efficiency【User-Friendly】Simple to use its user-friendly control panel. Just use the button to select the output power level (a total of 11 levels are available) and the tools used (7 tools, triangle/rings/wave wire/pressing spot welding/shrinking/rivets) two parameters, you can start operation【Security】The Vehicle Panel Spot Machine is equipped with an automatic overheating protection system. In the case of excessive use of the machine, the system can automatically stop the machine for a few minutes and send out an alarm【Accessories】The various accessories will be enough for you to use for a long time. The package Included: Welder with cable，Consumable tools box, Manual sucker pulling head, Spot welding pulling hammer, 6-hook head, Wrench, Wave wires, Carbon rod, Straight rings, Wave wires electrode, Spot welding electrode, Carbon rod electrode, Meson electrode, Meson pad, Spot welding pulling pad, Gun with cable 70mm²,2m

Are you fed up with the complicated operation of traditional car dent pullers? Use poorly? DENTPULLER Spot Welder Dent Puller can provide a powerful current of 3800A, allowing you to weld firmly and operate easily. Main Features: 110V, 3800W Working Power. Strong welding.Super power generates a point in 2 seconds to achieve the effect of firm welding. Intelligent pulse system brings superior welding effect.The automatic pulse function automatically detects the power link when the tool touches the steel plate, and quickly forms a solder joint, which is firm and efficient. A total of 11 output power levels, 7 tools can optional. 7 Tools: triangle/rings/wave wire/pressing spot welding/shrinking/rivets.Suitable for steel plates of various thicknesses. User-friendly control panel. Press the button to start operation through only one or two steps to choose the function. How to operate： Connect the earth clamp of the generator to the sheet metal to be straightened and follow the instructions below. Strip the area where the metal is to be worked. Attach the required tool to be the end of the gun, tightening the nut firmly. Select the tool and the power level on the machine. Make contact between the tool on gun and the metal. Generate your welding arc. Notice： The operator must be properly trained. Package Includes: Welder with cable Consumable tools box Manual sucker pulling head Spot welding pulling hammer 6-hook head Wrench Wave wires Carbon rod Straight rings Wave wires electrode Spot welding electrode Carbon rod electrode Meson electrode Meson pad Spot welding pulling pad Gun with cable 70mm²,2m